Description Details :
From direct cooperative shipyard/sellers,we can offer sale 1 unit brand new ballastable barge 210ft x 70ft x 14ft.
The deck strenght is 15 tons and deck plate is 16 mm
Prompt delivery ex Batam.
1) Principal Dimensions
Length Overall : 210 feet
Breadth Overall : 70 feet
Depth Molded : 14 feet
Forward : Swim End
Deck Load : 15MT/m2
2) Scantling
a) Deck Plating : 16.0mm
b) Bottom Plating : 12.0mm (Forward 20ft : 14.0mm)
c) Side Plating : 12.0mm
d) Bulkhead Plating : 9.0mm
e) Longitudinal : Deck - 12mm x 150mm x 90mm angle bar
Bottom - 9mm x 125mm x 75mm angle bar
Side - 9mm x 125mm x 75mm angle bar
C/Blkd - 7mm x 125mm x 75mm angle bar
Stiffener - 9mm x 125mm x 75mm angle bar
f) Longitudinal Bulkhead: 2 lengths
g) Vertical Pillar : Fitted with 7 no. 200mm x 200mm H-beams from side shell to
side shell.
h) Diagonal Pillar : Fitted with 2 nos. 12mm x 150mm x 150mm angle bars from
side shell to side shell.
j) Longitudinal Girders : 7 lengths each on deck & bottom
Deck - 12mm x 400mm + 100mm
Bottom - 8mm x 325mm + 75mm
k) Web Frame : Deck - 8mm x 400mm + 100mm
Bottom - 8mm x 325mm + 75mm
3) Deck's Fittings :
a) Three (3) navigational light’s stands.
b) Suitable number of aluminum anodes for two years protection.
c) Suitable number of used tyre fenders tightened with ½” dia. chain.
d) Six (6) double bollards.
e) Deck Edge Coaming using 14mm x 300mm + 100mm Flange Plate.
4) Classification : Nippon Kaiji Kyokai (NKK)
5) Painting
Before fabrication, all external surface of deck, side and bottom plating will be shop blasted to SA2.5 at shop and primed with one coat of shop supplied primer. After fabrication, all external surface will be sand swept follows with Two (2) coats of Coaltar Epoxy paints (Hempel products) for the side and bottom plating and together with one (1) coat of tropical anti-fouling shall be added to the bottom plating. The deck plating be coated with one (2) coat of Coaltar Epoxy paint.
6) Ballast Tanks
Six (6) units of Ballast Tanks. All welding in these tanks are to be full weld. Before fabrication, all steel plates, angle bars and H-beams to be used for the ballast tanks shall be shop blasted and primed with one coat of shop primer. After fabrication, all internal welding shall be power tooled and touch up with primer. The ballast tanks shall be given two (2) coat of Coaltar Epoxy paints (Hempel).
~~ADA WOG~~
Full spec upon request
Price contact
Sub unsold